When cleaning Yakeli bath crock with sponge or cloth, do not use coarse cloth, clean cloth, do not use any cleaning agent containing granular objects, it is best to avoid direct sunlight and high temperature cigarette contact. Use a mild cleaning agent (such as dish detergent), do not use abrasive cleaning agent. Acrylic bathtub can also be cleaned with glass water. The cast iron bathtub should be fully rinsed with clean water every time, and dry with soft cloth. If a stubborn stain is encountered, a small amount of abrasive cleaning agent can be used for cleaning. Clean the bottom antiskid surface with a soft nylon brush.  Do not use steel ball, steel wire brush or sponge to scrub grinding.

The system should be washed more than two times a month. Adjust the nozzles in clockwise direction to the completely closed position to prevent air leakage. Fill the bathtub with warm water to the top 2 inches above the maximum nozzle, or leave the water in the bathtub after use. Add two teaspoons of low foam powder automatic dish detergent and a small amount of household bleach in the water. Open the massage bath for 5 to 10 minutes, then shut down, drain the water, and then rinse the bath surface with water. The bathtub is in hot and humid state for a long time. It will also breed many bacteria. Sometimes it is clean, and its surface looks clean. Actually, there are still many bacteria.  Recommend regular use of water to wipe the surface of the bathtub, do not use sterile water casually, because the disinfection water can not kill fungi and fungi and so on.

Have to wipe besmirch, also can use half a lemon dipped in salt scrub brush, toothpaste can also be coated with a function with a soft bristled toothbrush, turpentine at this time is to use. For scale, it's very good for a toilet to clean a toilet. If you don't like the smell of the nose, you can use lemon and vinegar in a more natural way. Do not use a cleaning agent with faded functions, especially when the home bathtub is with color. Against fungi and bacteria that cause fungal disease, rinse with bleached powder water and peroxy water and dry immediately.

How does the acrylic bathtub maintain?

Repair the wound in time

The installation of the bathtub do not move privately, need to move the position, must contact the professional staff. Do not hit or hit the surface with hard objects, causing bruises or scratches. Acrylic bathtub, if necessary, is used to repair dim or scratched parts. It can be cleaned with clean rag mixed with colorless automatic polishing solution, and then coated with a layer of colorless protective wax. Please do not stay in the regional waxing, to prevent slipping.

Handle pipe plugging at any time and disinfect on time

The pipe should be cleaned once or two times a week to clean up the taste, and second to prevent bacteria from growing. Can be used specially to clean the sewer, fill the sewer, 5 minutes after cleaning, pay attention to the metal pipe. If the bath is blocked, can be the first to water valve closed, and then put the right amount of tap water in the bathtub; a rubber suction device (toilet use) placed in to water valve; in the open water valve, water overflow muffle basin or bath; and then quickly to attract, suck out dirt or hair cleaned in time. In the case of serious congestion, it can be repeated several times until it is cleared up.